Expert Sink & Faucet Repair in Minneapolis, MN
Dripping faucet, leak under the cabinet, or a fixture that's past its prime? We handle everything from a quick cartridge swap to a full sink replacement, and we're usually available same day.
- Same-Day Service Available
- Upfront Pricing, No Hourly Surprises
- Licensed, Insured & Local
We'll get back to you quickly, usually same day.
Request a quote
Honest pricing. On time. Neighbor-first service.
That Drip or Leak Under Your Sink Won't Fix Itself
Minneapolis homes deal with hard water and older plumbing fixtures that wear out faster than homeowners expect. A dripping faucet or a small puddle in the cabinet might look minor right now, but left alone they lead to corroded supply lines, damaged cabinetry, and mold that doesn’t show up until it’s expensive to address. Sink and faucet repairs are also one of those jobs that looks simple until you’re under the cabinet with the water off and the wrong part.
- Faucet dripping or won't fully shut off
- Moisture or puddle under the sink cabinet
- Low water pressure from one fixture
- Handles that are stiff, loose, or stripped
- Corroded or discolored fixture
What Our Sink & Faucet Services Cover
Twin Cities Premier Plumbing handles the full range of sink and faucet work for Minneapolis homeowners: installation, replacement, and repair across kitchen sinks, bathroom vanity sinks, and utility or laundry sinks.
Faucet Repair
Most dripping faucets come down to a worn cartridge, a clogged aerator, or a faulty valve seat. We source the correct brand-specific replacement part (Moen, Delta, and Kohler cartridges are not interchangeable) and replace it on the spot. Minnesota’s hard water accelerates cartridge and aerator wear faster than in most other parts of the country.
Faucet Installation & Replacement
Full installation: shutting off angle stop valves, disconnecting braided stainless supply lines, removing old hardware with a basin wrench, cleaning the deck surface, and setting the new fixture with plumber’s putty or silicone per manufacturer spec. Full leak check before leaving.
Sink Replacement
Disconnecting and resetting the P-trap and drain strainer, scoring and removing old silicone seal, and for undermount installs, bonding the new basin to the countertop with clips and silicone. Drop-in, undermount, and pedestal configurations.
What We Check While We’re in There
- hut-off valve condition (especially corroded compression-style in older MN homes)
- Braided supply line age and condition
- P-trap assembly and drain strainer
- Adjacent galvanized drain sections common in pre-2000 housing stock
A faucet swap typically wraps up in 1–2 hours. A full sink replacement with a new faucet usually runs 2–4 hours. We walk you through what was done, show you your shut-off valve locations, and leave the work area clean.
Our Sink & Faucet Work in Minneapolis
What Minneapolis Homeowners Say About Our Sink & Faucet Work
Why Minneapolis Homeowners Choose Twin Cities Premier Plumbing
Upfront Price Before We Start
We quote the job before we touch anything. You know exactly what you're paying before a single wrench turns. No hourly clock, no parts markup, no surprise invoice.
We Install What You Already Bought
Have a Delta or Kohler faucet from Home Depot ready to go? We install homeowner-supplied fixtures all the time and make sure every connection is leak-free before we leave.
We Check the Whole Cabinet
While we're under the sink, we look at the shut-off valves, supply lines, and P-trap. Minneapolis homes often have aging components right next to the fixture. We flag what matters, honestly.
Friendly Service, Zero Sales Pressure
Our plumbers come to your home to fix the problem and leave things clean. No add-on pitches, no scare tactics. Just honest work from a locally owned Minneapolis plumbing company.
How Our Sink & Faucet Service Works
Assess & Diagnose
Review the Scope With You
Complete the Work
Test & Inspect
Walk You Through It
How Much Does Sink & Faucet Service Cost in Minneapolis?
Pricing depends on a few things: what the job involves, the fixture type and complexity, whether anything secondary in the cabinet needs attention (shut-off valves, supply lines, or the P-trap), and how accessible the plumbing is. A cartridge swap is not the same job as a full undermount sink replacement.
We don’t quote sink and faucet work over the phone because a phone estimate is really just a guess. Instead, we come out, take a look, and give you an exact price before we start anything. No hourly rates, no hidden fees, and no surprises.
You May Also Need
Emergency Plumbing
General Plumbing Service Work
Sink Repair
Sink & Faucet Service FAQ
Most faucet repairs (cartridge swap, aerator replacement, handle fix) take 1 to 2 hours from arrival to cleanup. A full faucet replacement typically runs in the same window. A complete sink replacement with a new faucet usually takes 2 to 4 hours depending on the sink type and whether we find any secondary components in the cabinet that need attention.
Pricing depends on the scope of the job: the type of repair or installation, the fixture involved, and whether anything else in the cabinet should be addressed. We provide a clear, upfront price before we start any work. No hourly rates, no surprises, no hidden fees.
In Minneapolis and surrounding suburbs, hard water is the most common reason. Minnesota tap water carries high mineral content that accelerates wear on faucet cartridges, O-rings, and valve seats significantly faster than in softer-water regions. If your faucet is dripping again within a few months, a full cartridge replacement and honest look at the fixture’s age is usually the next right step.
Absolutely. We install homeowner-supplied fixtures all the time. Bring home the Moen, Delta, or Kohler fixture of your choice and we’ll make sure it fits your existing plumbing configuration, set it with the correct sealant, and confirm it is leak-free before we leave. We’ll let you know upfront if there are any compatibility issues.
Yes, same-day service is available for most sink and faucet calls in Minneapolis and the surrounding metro. We carry common faucet cartridges, braided supply lines, and P-trap fittings on the truck, so most repairs are completed in a single visit without waiting on parts.
If the fixture is less than 10 years old and the damage is limited to a cartridge, aerator, or O-ring, repair is usually the right call. If the faucet body is corroded, the finish is deteriorating, or you are dealing with repeat drips after multiple repairs, replacement tends to make more sense. When we come out, we’ll give you a straight answer on which direction saves you more money.
Yes. In addition to residential service, Twin Cities Premier Plumbing handles sink and faucet repairs and installations for light commercial properties in the Minneapolis area. Give us a call at (763) 343-9806 to talk through the scope of your project.
Let's Get Your Sink or Faucet Working Right
Schedule your sink and faucet service online or call for same-day availability in Minneapolis.